Trends Audio introduces the mini-size Class-T Power amplifier TA-10.2P providing up to 2x15W output with the bundled AC power supply unit. Thanks to the Tripath's proprietary Class-T Digital Power Processing (TM) technology and our special techniques in circuit design and component selection, Trends TA-10.2P achieves the sound quality of high-end H-Fi but in a very affordable price.
Trends TA-10.2P performs very like Class-AB amplifiers with high fidelity and warm sound. Yet, its power efficiency and physical size is just like Class-D amplifiers. Even it's maximum output power is only 2x15W, Trends TA-10.2P is actually powerful to push even the floor-stand speakers with sufficient and good control of bass sound. It has no problem for normal home use purpose
Features: -applied the proprietary T-amp technology for audiophile quality sound, high power efficiency (90%) and less heat generation
-compact design (mini-size & light weight), easy portable and setup.
-provide up to 2x15W output.
-work with Trends PA-10 or other pre-amplifiers with audio source selection.
-using specially designed audiophile-grade "Trends" MKP capacitors as audio input coupling capacitor. -applied the lowest LSR & highest ripple current Rubycon MCZ series tank capacitors.
-remove the volume pot to minimize distortion.
-applied 4mm thick aluminum faceplate [Trends TA-10.2P SE only].
-re-organized the sockets layout of the back panel which provides a more convenient audio cable and speaker cable connections.
-an AC adaptor is bundled for continuous power supply.
-separated amplifier & AC adaptor design to minimize mutual interference and flexible to apply other power sources, e.g. Trends PW-10 PSU or lead-acid battery.
-standard audio and speaker sockets used to be compatible with most audiophile quality cables.
-the DC bias between speaker terminals can be offset (close to �0mV) by adjusting the potentiometers (factory pre-set). It suppresses the "pop" sound when power on/off and also increase the sound purity.
-built-in over-current protection
-built-in over-temperation protection
-audiophile-graded parts and components
-air-core inductor used (instead of magnetic-core) for better sound
-enhanced the chassis with beautiful satin finish and smarter black/white contrast provides not only good-looking, and also provides outstanding shielding capability.
- two years Limited Warranty.
The Award-winning Trends TA-10 includes:
"Best Buy" award from AudioVideoFoto-Bild in Italy
"The Great Digital AMP Shootout 2007" at Stereomojo.com
"Great Audiophile Gifts 2006 and 2007 at Enjoythemusic.com
"Blue Moon" award at 6moon.com
"MAXIMUM MOJO" award at Stereomojo.com
"Great Buy" at GoodSound.com
"2007 Editors' choice award" at HomeTheater.co.il
"Award Winners of 2007" by 6moons.com
"5 stars State of the Art Award" at thresholdlovers.com
"5 stars Award" at What Hi-Fi
"fairaudio's favourite Award 2009" at fairaudio.de
- Visit http://www.TrendsAudio.com)
for more details
Should your products ever require repair service please contact the service centers listed in the User Manual or visit their web site for more information.
(506220-VDESE)
Trends TA-10.2P SE Class-T Power Amplifier (Europe/French 2-round-legs/1 hole plug)[AV Devices] (Date: 2009-06-18)
Price($):
HK$1300(US$)
Publisher:Trends Audio
Spec. (Amp Unit):
T-Amp Chip: Tripath TA2024
Output Level:
- 2 x 15W @ 4ohm
- 2 x 10W @ 8ohm
Signal-to-Noise (SNR): 98dB
Dynamic Range: 98dB
THD+Noise - "Audiophile" Quality
- 0.03% @ 9W, 4ohm
- 0.1% @ 11W 4ohm
- 0.1% @ 6W 8ohm
- High Power
- 10% @ 15W 4ohm
- 10% @ 10W 8ohm
Power Efficiency: - 81% @ 15W, 4ohm
- 90% @ 10W, 8ohm Power Socket: 5.5mm/2.1mm
Input Socket: RCA Audio IN (Left/Right) x 1 pair
Output Socket:
- Speaker OUT (Left) x 1 pair (+/-)
- Speaker OUT (Right) x 1 pair (+/-)
Other Switch & Knob:
- Power ON/OFF switch x 1
- LED power indicator x 1 (blue)
Power Supply: DC 12V~13.2V(max.)
Dimensions: 76mm(W) x 46mm(H) x 114mm / 150mm[incl. sockets & knob](D)
Weight: 500g
Spec. (Power Unit):
Power mode: Switching Power
AC Input Voltage: Universal AC 100V-240V / 50~60Hz
DC Output Voltage: DC 12V / 4A (48W)
Ripple & Noise: <=50mV
Dimensions: 120mm(L) x 58mm(W) x 38mm(H)
Weight: 400g
Regulatory Compliance: PSE, CE & GS Approved
Accessories:
- 2-round-legs/1 hole plug (IEC plug and another plug with different country standards available)
- User Guide x 1
- Warranty Card x 1
Dimensions (Packing):
Dimensions(DxWxH): 200mm x 155mm x 75mm
Trends TA-10.2P SE Class-T Power Amplifier (U.S/Taiwan 2-flat-legs/1 round leg plug)[AV Devices] (Date: 2009-06-18)
Price($):
HK$1300(US$)
Publisher:Trends Audio
Spec. (Amp Unit):
T-Amp Chip: Tripath TA2024
Output Level:
- 2 x 15W @ 4ohm
- 2 x 10W @ 8ohm
Signal-to-Noise (SNR): 98dB
Dynamic Range: 98dB
THD+Noise - "Audiophile" Quality
- 0.03% @ 9W, 4ohm
- 0.1% @ 11W 4ohm
- 0.1% @ 6W 8ohm
- High Power
- 10% @ 15W 4ohm
- 10% @ 10W 8ohm
Power Efficiency: - 81% @ 15W, 4ohm
- 90% @ 10W, 8ohm Power Socket: 5.5mm/2.1mm
Input Socket: RCA Audio IN (Left/Right) x 1 pair
Output Socket:
- Speaker OUT (Left) x 1 pair (+/-)
- Speaker OUT (Right) x 1 pair (+/-)
Other Switch & Knob:
- Power ON/OFF switch x 1
- LED power indicator x 1 (blue)
Power Supply: DC 12V~13.2V(max.)
Dimensions: 76mm(W) x 46mm(H) x 114mm / 150mm[incl. sockets & knob](D)
Weight: 500g
Spec. (Power Unit):
Power mode: Switching Power
AC Input Voltage: Universal AC 100V-240V / 50~60Hz
DC Output Voltage: DC 12V / 4A (48W)
Ripple & Noise: <=50mV
Dimensions: 120mm(L) x 58mm(W) x 38mm(H)
Weight: 400g
Regulatory Compliance: PSE, CE & GS Approved
Accessories:
- 2-flat-legs/1 round leg plug (IEC plug and another plug with different country standards available)
- User Guide x 1
- Warranty Card x 1
Dimensions (Packing):
Dimensions(DxWxH): 200mm x 155mm x 75mm
Trends TA-10.2P SE Class-T Power Amplifier (U.K/HK 13A 3-flat-legs plug)[AV Devices] (Date: 2009-06-18)
Price($):
HK$1300(US$)
Publisher:Trends Audio
Spec. (Amp Unit):
T-Amp Chip: Tripath TA2024
Output Level:
- 2 x 15W @ 4ohm
- 2 x 10W @ 8ohm
Signal-to-Noise (SNR): 98dB
Dynamic Range: 98dB
THD+Noise - "Audiophile" Quality
- 0.03% @ 9W, 4ohm
- 0.1% @ 11W 4ohm
- 0.1% @ 6W 8ohm
- High Power
- 10% @ 15W 4ohm
- 10% @ 10W 8ohm
Power Efficiency: - 81% @ 15W, 4ohm
- 90% @ 10W, 8ohm Power Socket: 5.5mm/2.1mm
Input Socket: RCA Audio IN (Left/Right) x 1 pair
Output Socket:
- Speaker OUT (Left) x 1 pair (+/-)
- Speaker OUT (Right) x 1 pair (+/-)
Other Switch & Knob:
- Power ON/OFF switch x 1
- LED power indicator x 1 (blue)
Power Supply: DC 12V~13.2V(max.)
Dimensions: 76mm(W) x 46mm(H) x 114mm / 150mm[incl. sockets & knob](D)
Weight: 500g
Spec. (Power Unit):
Power mode: Switching Power
AC Input Voltage: Universal AC 100V-240V / 50~60Hz
DC Output Voltage: DC 12V / 4A (48W)
Ripple & Noise: <=50mV
Dimensions: 120mm(L) x 58mm(W) x 38mm(H)
Weight: 400g
Regulatory Compliance: PSE, CE & GS Approved
Accessories:
- 13A 3-flat-legs plug (IEC plug and another plug with different country standards available)
- User Guide x 1
- Warranty Card x 1
Dimensions (Packing):
Dimensions(DxWxH): 200mm x 155mm x 75mm
Trends TA-10.2P SE Class-T Power Amplifier (China/Australia 3-flat-legs plug)[AV Devices] (Date: 2009-06-18)
Price($):
HK$1300(US$)
Publisher:Trends Audio
Spec. (Amp Unit):
T-Amp Chip: Tripath TA2024
Output Level:
- 2 x 15W @ 4ohm
- 2 x 10W @ 8ohm
Signal-to-Noise (SNR): 98dB
Dynamic Range: 98dB
THD+Noise - "Audiophile" Quality
- 0.03% @ 9W, 4ohm
- 0.1% @ 11W 4ohm
- 0.1% @ 6W 8ohm
- High Power
- 10% @ 15W 4ohm
- 10% @ 10W 8ohm
Power Efficiency: - 81% @ 15W, 4ohm
- 90% @ 10W, 8ohm Power Socket: 5.5mm/2.1mm
Input Socket: RCA Audio IN (Left/Right) x 1 pair
Output Socket:
- Speaker OUT (Left) x 1 pair (+/-)
- Speaker OUT (Right) x 1 pair (+/-)
Other Switch & Knob:
- Power ON/OFF switch x 1
- LED power indicator x 1 (blue)
Power Supply: DC 12V~13.2V(max.)
Dimensions: 76mm(W) x 46mm(H) x 114mm / 150mm[incl. sockets & knob](D)
Weight: 500g
Spec. (Power Unit):
Power mode: Switching Power
AC Input Voltage: Universal AC 100V-240V / 50~60Hz
DC Output Voltage: DC 12V / 4A (48W)
Ripple & Noise: <=50mV
Dimensions: 120mm(L) x 58mm(W) x 38mm(H)
Weight: 400g
Regulatory Compliance: PSE, CE & GS Approved
Accessories:
- 3-flat-legs x 1 (IEC plug and another plug with different country standards available)
- User Guide x 1
- Warranty Card x 1
AC Input Voltage: Universal AC 100V-240V / 50~60Hz
DC Output Voltage: DC 12V / 4A (48W)
Ripple & Noise:
Dimensions (Packing):
Dimensions(DxWxH): 200mm x 155mm x 75mm